logo

Could not compile stylesheet for simplistic. Using last compiled stylesheet.

Brand new IGEP v2 RC6 does not boot.

posted in Uncategorized
Thursday, March 01 2012, 03:21 PM
0
Hello, I received this board two weeks ago, and today I have made and attempt to evaluate it, and found that the board does not boot from his internal flash (preinstalled software), nor the Ubuntu/Linaro ISEE supplyed SD card. -When I tried to boot from internal flash, the console shows: IGEP-X-Loader 2.3.0-1 (Dec 7 2011 - 09:07:55) XLoader: Processor DM3730 - ES1.2 Scanning JFFS2 FS: . read_nand_cached: error reading nand off 0x8d7800 size 8192 bytes done. read_nand_cached: error reading nand off 0x8d6000 size 8192 bytes off = 0x8d59e4 magic 0x1985 type 0xe002 node.totlen = 4164 -When the SD card is inserted, the console output is (last part): [ 3.295104] mmc0: host does not support reading read-only switch. assuming write-enable. [ 3.313537] mmc0: new high speed SDHC card at address b368 [ 3.319946] mmcblk0: mmc0:b368 USD 3.75 GiB [ 3.327453] mmcblk0: p1 p2 [ 3.424377] mmc1: new SDIO card at address 0001 [ 3.468811] Console: switching to colour frame buffer device 160x45 [ 3.486450] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.495056] omap_vout omap_vout: probed for an unknown device [ 3.507812] EXT3-fs: barriers not enabled [ 3.587554] usb 1-1.1: new low speed USB device using ehci-omap and address 3 [ 3.716613] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c05b [ 3.723846] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.731536] usb 1-1.1: Product: USB Optical Mouse [ 3.736450] usb 1-1.1: Manufacturer: Logitech [ 3.747344] input: Logitech USB Optical Mouse as /devices/platform/ehci-omap.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input2 [ 3.760437] generic-usb 0003:046D:C05B.0001: input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-ehci-omap.0-1.1/input0 [ 3.860870] usb 1-1.2: new low speed USB device using ehci-omap and address 4 [ 4.007354] usb 1-1.2: New USB device found, idVendor=0458, idProduct=0708 [ 4.014617] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.022308] usb 1-1.2: Product: Multimedia Keyboard [ 4.027404] usb 1-1.2: Manufacturer: Genius [ 4.046417] input: Genius Multimedia Keyboard as /devices/platform/ehci-omap.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input3 [ 4.059173] generic-usb 0003:0458:0708.0002: input: USB HID v1.11 Keyboard [Genius Multimedia Keyboard] on usb-ehci-omap.0-1.2/input0 [ 4.088867] input: Genius Multimedia Keyboard as /devices/platform/ehci-omap.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input4 [ 4.101104] generic-usb 0003:0458:0708.0003: input: USB HID v1.11 Device [Genius Multimedia Keyboard] on usb-ehci-omap.0-1.2/input1 [ 29.578338] kjournald starting. Commit interval 5 seconds [ 29.931701] EXT3-fs (mmcblk0p2): using internal journal [ 29.937438] EXT3-fs (mmcblk0p2): 2 orphan inodes deleted [ 29.943054] EXT3-fs (mmcblk0p2): recovery complete [ 29.995788] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode [ 30.003021] VFS: Mounted root (ext3 filesystem) on device 179:2. [ 30.009368] Freeing init memory: 216K init: ureadahead main process (676) terminated with status 5 speech-dispatcher disabled; edit /etc/default/speech-dispatcher Last login: Sat Jan 1 01:00:58 CET 2000 on tty1 * PulseAudio configured for per-user sessions * Enabling additional executable binary formats binfmt-support [ OK ] Linux localhost.localdomain 2.6.37 #1 Thu Jan 19 15:06:23 CET 2012 armv7l GNU/Linux Ubuntu 10.10 Welcome to Linaro! * Documentation: [url=http://www.linaro.org]http://www.linaro.org[/url] New release \\\'natty\\\' available. Run \\\'do-release-upgrade\\\' to upgrade to it. root@localhost:~# [ 92.511016] end_request: I/O error, dev mtdblock0, sector 0 [ 92.516815] Buffer I/O error on device mtdblock0, logical block 0 [ 92.544464] end_request: I/O error, dev mtdblock0, sector 0 [ 92.550262] Buffer I/O error on device mtdblock0, logical block 0 [ 92.589202] end_request: I/O error, dev mtdblock0, sector 0 [ 92.595001] Buffer I/O error on device mtdblock0, logical block 0 [ 92.623901] end_request: I/O error, dev mtdblock0, sector 0 [ 92.629699] Buffer I/O error on device mtdblock0, logical block 0 [ 92.638549] end_request: I/O error, dev mtdblock0, sector 0 [ 92.644378] Buffer I/O error on device mtdblock0, logical block 0 [ 92.660186] end_request: I/O error, dev mtdblock0, sector 0 [ 92.666015] Buffer I/O error on device mtdblock0, logical block 0 [ 92.684906] end_request: I/O error, dev mtdblock0, sector 0 [ 92.690734] Buffer I/O error on device mtdblock0, logical block 0 [ 92.743499] end_request: I/O error, dev mtdblock0, sector 0 [ 92.749328] Buffer I/O error on device mtdblock0, logical block 0 [ 92.790618] end_request: I/O error, dev mtdblock0, sector 0 [ 92.796447] Buffer I/O error on device mtdblock0, logical block 0 [ 92.828369] end_request: I/O error, dev mtdblock0, sector 0 [ 92.834167] Buffer I/O error on device mtdblock0, logical block 0 [ 92.868377] end_request: I/O error, dev mtdblock0, sector 0 [ 92.889221] end_request: I/O error, dev mtdblock0, sector 0 [ 92.931854] end_request: I/O error, dev mtdblock0, sector 0 [ 92.952209] end_request: I/O error, dev mtdblock0, sector 0 [ 92.970916] end_request: I/O error, dev mtdblock0, sector 0 [ 92.994354] uncorrectable error : [ 92.997711] end_request: I/O error, dev mtdblock0, sector 64 [ 93.018463] uncorrectable error : [ 93.021850] end_request: I/O error, dev mtdblock0, sector 64 [ 93.034576] uncorrectable error : [ 93.038024] end_request: I/O error, dev mtdblock0, sector 64 [ 93.046447] uncorrectable error : [ 93.049926] end_request: I/O error, dev mtdblock0, sector 64 [ 93.058563] uncorrectable error : [ 93.062011] end_request: I/O error, dev mtdblock0, sector 64 [ 93.078735] uncorrectable error : [ 93.082183] end_request: I/O error, dev mtdblock0, sector 64 [ 93.091583] uncorrectable error : [ 93.095062] end_request: I/O error, dev mtdblock0, sector 64 [ 93.105041] uncorrectable error : [ 93.108489] end_request: I/O error, dev mtdblock0, sector 64 [ 93.116485] uncorrectable error : [ 93.119964] end_request: I/O error, dev mtdblock0, sector 64 [ 93.130432] end_request: I/O error, dev mtdblock0, sector 0 [ 93.146026] end_request: I/O error, dev mtdblock0, sector 0 [ 93.165527] end_request: I/O error, dev mtdblock0, sector 0 [ 93.177276] end_request: I/O error, dev mtdblock0, sector 0 [ 93.188690] end_request: I/O error, dev mtdblock0, sector 0 [ 93.206542] uncorrectable error : [ 93.209960] end_request: I/O error, dev mtdblock0, sector 16 [ 93.227874] end_request: I/O error, dev mtdblock0, sector 0 [ 93.246948] end_request: I/O error, dev mtdblock0, sector 0 [ 93.289123] end_request: I/O error, dev mtdblock0, sector 0 [ 93.321807] end_request: I/O error, dev mtdblock0, sector 0 [ 93.358764] end_request: I/O error, dev mtdblock0, sector 0 [ 93.377258] end_request: I/O error, dev mtdblock0, sector 0 [ 93.388946] end_request: I/O error, dev mtdblock0, sector 0 [ 93.400299] end_request: I/O error, dev mtdblock0, sector 0 [ 93.415283] end_request: I/O error, dev mtdblock0, sector 0 [ 93.430053] end_request: I/O error, dev mtdblock0, sector 0 [ 93.446868] end_request: I/O error, dev mtdblock0, sector 0 [ 93.459167] end_request: I/O error, dev mtdblock0, sector 0 [ 93.471282] end_request: I/O error, dev mtdblock0, sector 0 [ 93.501190] end_request: I/O error, dev mtdblock0, sector 0 [ 93.533813] end_request: I/O error, dev mtdblock0, sector 0 [ 93.563812] end_request: I/O error, dev mtdblock0, sector 0 [ 93.579345] end_request: I/O error, dev mtdblock0, sector 0 [ 93.621063] end_request: I/O error, dev mtdblock0, sector 0 [ 93.635925] uncorrectable error : [ 93.639312] end_request: I/O error, dev mtdblock0, sector 8 [ 93.708526] end_request: I/O error, dev mtdblock0, sector 0 [ 93.751190] end_request: I/O error, dev mtdblock0, sector 0 [ 93.962066] end_request: I/O error, dev mtdblock0, sector 0 [ 94.004760] end_request: I/O error, dev mtdblock0, sector 0 [ 94.031677] end_request: I/O error, dev mtdblock0, sector 0 [ 94.071502] end_request: I/O error, dev mtdblock0, sector 0 [ 94.100341] end_request: I/O error, dev mtdblock0, sector 0 [ 94.134246] end_request: I/O error, dev mtdblock0, sector 0 [ 94.165283] end_request: I/O error, dev mtdblock0, sector 0 [ 94.196838] end_request: I/O error, dev mtdblock0, sector 0 [ 94.205108] end_request: I/O error, dev mtdblock0, sector 0 [ 94.233764] end_request: I/O error, dev mtdblock0, sector 0 [ 94.263275] end_request: I/O error, dev mtdblock0, sector 0 [ 94.302581] end_request: I/O error, dev mtdblock0, sector 0 [ 94.353424] end_request: I/O error, dev mtdblock0, sector 0 [ 94.378479] end_request: I/O error, dev mtdblock0, sector 0 [ 94.406463] end_request: I/O error, dev mtdblock0, sector 0 [ 94.431488] uncorrectable error : [ 94.434875] end_request: I/O error, dev mtdblock0, sector 64 [ 94.482025] uncorrectable error : [ 94.485504] end_request: I/O error, dev mtdblock0, sector 64 [ 94.527709] uncorrectable error : [ 94.531097] end_request: I/O error, dev mtdblock0, sector 64 [ 94.587310] uncorrectable error : [ 94.590698] end_request: I/O error, dev mtdblock0, sector 64 [ 94.636627] uncorrectable error : [ 94.640014] end_request: I/O error, dev mtdblock0, sector 64 [ 94.688690] uncorrectable error : [ 94.692077] end_request: I/O error, dev mtdblock0, sector 64 [ 94.727752] uncorrectable error : [ 94.731140] end_request: I/O error, dev mtdblock0, sector 64 [ 94.777923] uncorrectable error : [ 94.781341] end_request: I/O error, dev mtdblock0, sector 64 [ 94.796539] uncorrectable error : [ 94.799987] end_request: I/O error, dev mtdblock0, sector 64 [ 94.815643] end_request: I/O error, dev mtdblock0, sector 0 [ 94.844940] end_request: I/O error, dev mtdblock0, sector 0 [ 94.885284] end_request: I/O error, dev mtdblock0, sector 0 [ 94.923339] end_request: I/O error, dev mtdblock0, sector 0 [ 94.986663] end_request: I/O error, dev mtdblock0, sector 0 [ 95.018615] uncorrectable error : [ 95.022003] end_request: I/O error, dev mtdblock0, sector 16 [ 95.056274] end_request: I/O error, dev mtdblock0, sector 0 [ 95.079315] end_request: I/O error, dev mtdblock0, sector 0 [ 95.134368] end_request: I/O error, dev mtdblock0, sector 0 [ 95.141113] end_request: I/O error, dev mtdblock0, sector 0 [ 95.180938] end_request: I/O error, dev mtdblock0, sector 0 [ 95.204315] end_request: I/O error, dev mtdblock0, sector 0 [ 95.219970] end_request: I/O error, dev mtdblock0, sector 0 [ 95.251251] end_request: I/O error, dev mtdblock0, sector 0 [ 95.274627] end_request: I/O error, dev mtdblock0, sector 0 [ 95.305908] end_request: I/O error, dev mtdblock0, sector 0 [ 95.322631] end_request: I/O error, dev mtdblock0, sector 0 [ 95.344940] end_request: I/O error, dev mtdblock0, sector 0 [ 95.381530] end_request: I/O error, dev mtdblock0, sector 0 [ 95.409912] end_request: I/O error, dev mtdblock0, sector 0 [ 95.451141] end_request: I/O error, dev mtdblock0, sector 0 [ 95.479431] end_request: I/O error, dev mtdblock0, sector 0 [ 95.501495] end_request: I/O error, dev mtdblock0, sector 0 [ 95.525390] end_request: I/O error, dev mtdblock0, sector 0 [ 95.552795] uncorrectable error : [ 95.556243] end_request: I/O error, dev mtdblock0, sector 8 [ 95.576812] end_request: I/O error, dev mtdblock0, sector 0 [ 95.615264] end_request: I/O error, dev mtdblock0, sector 0 [ 2.992004] IGEP SoC init -bash: [: missing `]\\\' root@localhost:~# [ 3.092559] asoc: twl4030-hifi <-> omap-mcbsp-dai.1 mapping ok -bash: -: No such file or directory [ 3.098999] usb 1-1: new high speed USB device using ehci-omap and address 2 root@localhost:~# [ 3.098999] usb 1-1: new high speed USB device using ehci-omap and address 2 -bash: [: missing `]\\\' [ 3.125244] Initializing XFRM netlink socket root@localhost:~# [ 3.115966] ALSA device list: -bash: [: missing `]\\\' ET: Registered protocol family 17 root@localhost:~# [ 3.119171] #0: igep -bash: [: missing `]\\\' 5 root@localhost:~# [ 3.121856] TCP cubic registered -bash: [: missing `]\\\' [ 3.139251] lib80211: common routines for IEEE802.11 drivers root@localhost:~# [ 3.125244] Initializing XFRM netlink socket -bash: [: missing `]\\\' [ 3.145263] Registering the dns_resolver key type root@localhost:~# [ 3.129821] NET: Registered protocol family 17 -bash: [: missing `]\\\' root@localhost:~# [ 3.134552] NET: Registered protocol family 15 -bash: [: missing `]\\\' root@localhost:~# [ 3.139251] lib80211: common routines for IEEE802.11 drivers -bash: [: missing `]\\\' root@localhost:~# [ 3.145263] Registering the dns_resolver key type -bash: [: missing `]\\\' root@localhost:~# An then it freeze. It seems to be a hardware failure, isn`t it? Regards.
Responses (4)
  • Accepted Answer

    Friday, March 02 2012, 09:29 AM - #permalink
    0
    Hi, We\\\'ve encountered a problem with default demo firmware flashed to IGEP v2 RC6 boards, the problem was related to the change of the flash device. So please, first of all could you update your demo firmware as explained here to check that your hardware works properly: [url=http://labs.igep.es/index.php/Update_the_PRE-INSTALLED_software_image_to_a_current_release]http://labs.igep.es/index.php/Update_th ... nt_release[/url] Then we\\\'ll focus in your SD-card problem.
    The reply is currently minimized Show
  • Accepted Answer

    Friday, March 02 2012, 04:16 PM - #permalink
    0
    Hello again!, I\\\'m trying to create the SD with the new firmware, and I have found this problem: jdoe@ubuntu:~/IGEPsoftware/poky-firmware-3.3.1-11$ ./poky-media-create -mmc /dev/sdd1 --binary poky-image-sato-igep00x0-20120301104515.tar.gz --machine igep0020 Installing required command mkfs.ext4 from package e2fsprogs Reading package lists... Done Building dependency tree Reading state information... Done e2fsprogs is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 113 not upgraded. ./poky-media-create: line 58: [: /dev/sda: unary operator expected ./poky-media-create: line 58: [: /dev/sda1: unary operator expected ./poky-media-create: line 58: [: /dev/sda2: unary operator expected ./poky-media-create: line 58: [: /dev/sda5: unary operator expected ./poky-media-create: line 58: [: /dev/sda: unary operator expected ./poky-media-create: line 58: [: /dev/sda1: unary operator expected ./poky-media-create: line 58: [: /dev/sda2: unary operator expected ./poky-media-create: line 58: [: /dev/sda5: unary operator expected ./poky-media-create: line 58: [: /dev/sdb: unary operator expected ./poky-media-create: line 58: [: /dev/sdc: unary operator expected ./poky-media-create: line 58: [: /dev/sdd: unary operator expected ./poky-media-create: line 58: [: /dev/sdd1: unary operator expected ./poky-media-create: line 58: [: /dev/sde: unary operator expected Umounting Partitions sfdisk (util-linux-ng 2.13.1)Usage: sfdisk [options] device ... device: something like /dev/hda or /dev/sda useful options: -s [or --show-size]: list size of a partition -c [or --id]: print or change partition Id -l [or --list]: list partitions of each device -d [or --dump]: idem, but in a format suitable for later input -i [or --increment]: number cylinders etc. from 1 instead of from 0 -uS, -uB, -uC, -uM: accept/report in units of sectors/blocks/cylinders/MB -T [or --list-types]:list the known partition types -D [or --DOS]: for DOS-compatibility: waste a little space -R [or --re-read]: make kernel reread partition table -N# : change only the partition with number # -n : do not actually write to disk -O file : save the sectors that will be overwritten to file -I file : restore these sectors again -v [or --version]: print version -? [or --help]: print this message dangerous options: -g [or --show-geometry]: print the kernel\\\'s idea of the geometry -G [or --show-pt-geometry]: print geometry guessed from the partition table -x [or --show-extended]: also list extended partitions on output or expect descriptors for them on input -L [or --Linux]: do not complain about things irrelevant for Linux -q [or --quiet]: suppress warning messages You can override the detected geometry using: -C# [or --cylinders #]:set the number of cylinders to use -H# [or --heads #]: set the number of heads to use -S# [or --sectors #]: set the number of sectors to use You can disable all consistency checking with: -f [or --force]: do what I say, even if it is stupid jdoe@ubuntu:~/IGEPsoftware/poky-firmware-3.3.1-11$
    The reply is currently minimized Show
  • Accepted Answer

    Friday, March 02 2012, 05:50 PM - #permalink
    0
    Hi Alfesc, two lines of poky-media-create: [code] 57 for device in /dev/disk/by-id/*; do 58 if [ `realpath $device` = $MMC ]; then [/code] try --mmc = /dev/sdd (with two -). Regards Olaf
    The reply is currently minimized Show
  • Accepted Answer

    Tuesday, March 06 2012, 09:14 AM - #permalink
    0
    Thank you guys!, now it is performing well.
    The reply is currently minimized Show
Your Reply

SUPPORT


This email address is being protected from spambots. You need JavaScript enabled to view it.
This email address is being protected from spambots. You need JavaScript enabled to view it.
IGEP Community Wiki
IGEP Community Forum
IGEP Community Online Chat