logo

Could not compile stylesheet for simplistic. Using last compiled stylesheet.

Problem with Revision E and Poky

posted in Uncategorized
Wednesday, July 13 2011, 03:30 PM
bsott
bsott
Offline
0
Hello, we received new IGEP Modules, Revision E. My colleague made a mistake and ordered them without flashed Poky. Unfortunately we cannot flash Poky Linux using the image we used with Revision D (as described on the
[u][url=http://labs.igep.es/index.php/Getting_started_with_OMAP3_IGEP_module:3m3o1dtc]wiki page[/url][/u]
). When booting from this card, the red led is on and the green one is blinking, I can see new device usb0 in ifconfig but cannot ping 192.168.7.2 . Are there somewhere prebuilt images? Is there a way how to make it work without baseboard (no serial console, etc.), br.
Responses (4)
  • Accepted Answer

    Friday, July 15 2011, 09:17 AM - #permalink
    0
    Hi, There is an issue which affects the IGEP module rev. E with DM3730. The problem produce that USB OTG don\\\'t work, so for now it\\\'s not possible connect to the IGEP module through the USB OTG. Otherwise you can connect to the device through wifi or using a baseboard.We\\\'re working on this and we expect to release a new version with this fixed very soon. Sorry for the inconvenience.
    The reply is currently minimized Show
  • Accepted Answer

    bsott
    bsott
    Offline
    Friday, July 15 2011, 09:18 PM - #permalink
    0
    I see, That is why otg does not work on v2 rev C either...
    The reply is currently minimized Show
  • Accepted Answer

    Sunday, September 11 2011, 12:29 AM - #permalink
    0
    [b]eballetbo wrote:[/b]
    Hi, There is an issue which affects the IGEP module rev. E with DM3730. The problem produce that USB OTG don\\\'t work, so for now it\\\'s not possible connect to the IGEP module through the USB OTG. Otherwise you can connect to the device through wifi or using a baseboard.We\\\'re working on this and we expect to release a new version with this fixed very soon. Sorry for the inconvenience.
    Is this issue fixed now? If I order an IGEP module rev E (IGEP-MOD-30-RE-3730@1G-M5F5-W) today, will the ethernet over USB OTG work?
    The reply is currently minimized Show
  • Accepted Answer

    Monday, September 12 2011, 09:21 AM - #permalink
    0
    Hi, yes, commit be803120 fixes the issue, please update your kernel to latest version.
    The reply is currently minimized Show
Your Reply

SUPPORT


This email address is being protected from spambots. You need JavaScript enabled to view it.
This email address is being protected from spambots. You need JavaScript enabled to view it.
IGEP Community Wiki
IGEP Community Forum
IGEP Community Online Chat